Age & Date Calculator
Work out your exact age, the gap between two dates, a date after adding or subtracting time, working days and a countdown. Results update as you type, and nothing leaves your device.
Your results
Next birthday
-
Counted live from your device clock.
About your birth date
Born on a -
-
Western zodiac: -
Chinese zodiac: -
Your life in numbers (rough estimates)
Estimates only. They assume about 70 heartbeats and 16 breaths a minute, 8 hours of sleep a day, and 940 million km per orbit of the Sun. Your own numbers will differ.
-
0 working days
-
How age is calculated
Your age is the number of complete years that have passed since you were born. That sounds obvious until you try to do it by hand. A year isn't a fixed number of days, a month isn't either, and the calendar has a leap day thrown in every so often to keep it lined up with the seasons.
The simplest honest method works like this. Take the year of the date you're measuring to, subtract the birth year, and then ask one question: has the birthday already happened this year? If it hasn't, take one year off. That gives you the full years. For the months, you repeat the idea. Count forward from the last birthday, one calendar month at a time, until the next month would overshoot the target date. Whatever is left over is the days.
That's the method this calculator uses. It doesn't divide a number of days by 365, and it doesn't pretend every month has 30 days. It walks the real calendar, so the answer matches what you'd get if you marked each anniversary on a wall planner.
A worked example with month borrowing
Say someone was born on 28 November 1990, and you want their age on 6 October 2026. Write the two dates side by side and subtract each part.
| Part | Later date | Birth date | Difference |
|---|---|---|---|
| Years | 2026 | 1990 | 36 |
| Months | 10 | 11 | -1 |
| Days | 6 | 28 | -22 |
Two of those numbers are negative, which is where the borrowing comes in. The months column is -1, so borrow a year: that leaves 35 years and turns the -1 into 11 months. The days column is -22, so borrow a month: that leaves 10 months, and you add the length of the month you borrowed from. Here that's September, which has 30 days, so -22 becomes 8.
The result is 35 years, 10 months and 8 days. You can check it by going forward instead. Start on 28 November 1990, add 35 years to reach 28 November 2025, add 10 months to reach 28 September 2026, then count 8 days to land on 6 October. It works, and the calculator above does exactly this check internally.
The same person has lived about 13,096 days. If you divide that by 365.25 you get roughly 35.86, which is consistent with 35 years and 10 months. Totals in days are always exact. Totals in hours and minutes are not, for reasons covered further down.
Working out the difference between two dates
The difference between two dates is the same idea with a different starting point. Instead of a birth date you have any start date, and instead of today you have any end date. The Date Difference tab gives you the answer in years, months and days, and also as a single count of days and weeks. Most people need one or the other. A visa form usually asks for months, a hire agreement for days.
There's one choice that trips people up: whether to count the end date. From Monday to Friday, the plain difference is 4 days. If you count both Monday and Friday as days in the period, it's 5. Neither is wrong. The first is how long it takes to get from one date to the other. The second is how many calendar days the period covers. The tab has an "include the end date" switch so you can choose. When you're not sure, check how the document or contract you're working from phrases it. "Between" and "from, to and including" are not the same thing.
A quick example. How many days from 12 March to 25 June 2026? March has 19 days left after the 12th, April has 30, May has 31, and June adds 25. That's 19 + 30 + 31 + 25 = 105 days, which is 15 weeks exactly. Put the same dates in the calculator and you'll see 105.
Leap years and the 29 February problem
A year in the Gregorian calendar has 365 days, except leap years, which have 366. The rule has three parts. A year divisible by 4 is a leap year. A year divisible by 100 is not, unless it is also divisible by 400. So 2024 was a leap year, 1900 was not, and 2000 was. Over any 400-year stretch that gives 97 leap years, an average year length of 365.2425 days. That's why you shouldn't use 365.25 for anything that has to be exact.
People born on 29 February are sometimes called leaplings, and about one baby in 1,461 arrives on that date. They have an obvious puzzle. In a non-leap year, when is the birthday?
This calculator's default is to treat 28 February as the anniversary in non-leap years, the last day of February. That's a convention, and it keeps the arithmetic consistent: a month or year anniversary that doesn't exist falls on the last day of that month. If you'd rather use 1 March, there's a switch under the Age tab that changes the rule. A person born on 29 February 2008 turns 18 on 28 February 2026 under the first rule, and on 1 March 2026 under the second.
Which one applies in real life depends on where you are and what the document is for. Some places treat 28 February as the legal birthday in non-leap years, and some treat 1 March. If a rule like that matters to you, look up the local one or ask the office that issues the document.
Why months make date maths tricky
Months range from 28 to 31 days, and that's the whole difficulty. If you add one month to 31 January, where do you land? There's no 31 February. Most software, including this calculator, answers with the last day of the shorter month: 28 February in an ordinary year, 29 February in a leap year.
That has a few side effects worth knowing. Adding a month and then taking it away doesn't always bring you back to where you started. Start on 31 January 2026, add one month to get 28 February, subtract one month and you're at 28 January. The order of operations matters too. The Add or Subtract tab applies years and months first, then weeks and days. If you add "1 month and 10 days" to 31 January, the month step gives 28 February and the 10 days take you to 10 March. If you add 10 days first and then a month, you'd reach 10 February and then 10 March. Same answer here, but not always.
Business days vs calendar days
A calendar day is any day on the calendar. A business day, or working day, is a day when work normally happens. For most countries that's Monday to Friday, but not all. In several Middle Eastern countries the weekend is Friday and Saturday, and some workplaces run six or seven days a week. That's why the Working Days tab lets you pick the weekend: Saturday and Sunday, Friday and Saturday, or Sunday only.
Public holidays change the count further, and they differ by country, region and year. This calculator doesn't try to guess them, because a wrong guess is worse than no guess. Paste your own list, one date per line in the format 2026-12-25, and it will skip those days if they fall on a working day. A holiday that lands on a weekend isn't counted twice.
Here's a typical use. Someone hands in notice on Monday 5 October 2026 and their contract says 20 working days. Counting from 5 October to 30 October, both ends included, gives 20 weekdays across four full weeks. The same stretch is 26 calendar days. If Monday 12 October is a public holiday, it drops to 19, and they'd need to work until Monday 2 November. Always check how your contract counts. Some say the notice starts the day after it's given, and that moves the whole range by one day.
When you need an exact age
Most of the time, "about 35" is fine. But a few situations care about the exact day.
Passports, visas and applications
Many forms have an age cut-off: under 18, over 21, at least 16 years and 6 months. Suppose someone was born on 20 December 2008 and applies on 6 October 2026. They're 17 years, 9 months and 16 days old, which is 75 days short of their 18th birthday. If the form says "under 18 on the date of application", they qualify. If it says "under 18 on the date of arrival" and they arrive in January, they don't. The right reference date is whatever the form says, so set the "age at the date of" field to that day.
Babies and young children
Parents tend to count a baby's age in weeks for the first few months, then months, then years. A baby born on 2 September 2026 is 34 days old on 6 October, which is 4 weeks and 6 days, or 1 month and 4 days. The total weeks figure on the Age tab is there for exactly this.
School, sport and pensions
School entry dates, junior sports leagues and retirement or pension eligibility often use a birthday cut-off. These rules come from schools, clubs and governments, not from this page. Use the calculator to get the number, then check the rule with whoever sets it.
Counting age in different cultures
The method on this page is the international one: you start at zero and add a year on each birthday.
The traditional East Asian system counts a newborn as one year old, then adds a year at each Lunar New Year, not on the birthday. A baby born the day before Lunar New Year could be two years old at two days of age. South Korea, which had used several of these systems side by side, moved its legal and administrative age to the international method in June 2023. In daily conversation, some people there still use a year-based count where everyone gains a year on 1 January. Japan formally moved to the birthday-based method in 1950, and other countries in the region have their own histories with this.
If you're filling in a form for an organisation in one of these places, it will almost always want the international age. If you're talking with relatives, the traditional number may be the one they mean. The calculator gives you the international one.
Zodiac signs, Chinese zodiac and birth weekdays
The Age tab also shows a few things people tend to be curious about.
Western zodiac
The twelve signs are tied to date ranges, for example Aries from 21 March to 19 April. The exact switchover day can shift by a day from year to year, so someone born right on a boundary may see a different sign in different references. The calculator uses the commonly published ranges.
Chinese zodiac
The Chinese zodiac runs on a 12-year cycle of animals: Rat, Ox, Tiger, Rabbit, Dragon, Snake, Horse, Goat, Monkey, Rooster, Dog and Pig. The animal changes at Chinese New Year, which falls between about 21 January and 20 February, not on 1 January. For a birth date in that window, the calculator shows both possible animals and tells you which one applies depends on that year's New Year date. For example, 2026 is the Year of the Horse, starting in mid-February.
The weekday you were born
The weekday comes straight from the calendar, and it's accurate for any date after the Gregorian calendar was introduced in 1582, and extended backwards by convention before that. A quirk of the calendar: it repeats exactly every 400 years, because 400 years contain 146,097 days, which divides evenly into 20,871 weeks. That means the 13th of a month falls on a Friday slightly more often than on any other weekday.
Frequently asked questions
How do I calculate my exact age in years, months and days?
Enter your date of birth on the Age tab. The result shows complete years, then complete months, then days since your last monthly anniversary. Leave the second date as today for your current age, or change it to see your age on any other day, past or future.
How many days old am I?
The Age tab shows total days, weeks, months, hours and minutes. Days, weeks and months are exact calendar counts. Hours and minutes are the day count multiplied out, so they ignore the time of day you were born and any clock changes.
Does the calculator handle leap years?
Yes. It uses the full Gregorian rule: divisible by 4, except century years that aren't divisible by 400. 2000 and 2024 are leap years, 1900 and 2100 aren't.
When is a 29 February birthday in a non-leap year?
By default this page uses 28 February. You can switch to 1 March under the Age tab. Different places and organisations use different rules, so check the one that applies to you.
What's the difference between including and excluding the end date?
Excluding it counts the days that pass between the two dates, so Monday to Friday is 4. Including it counts both dates as part of the period, so the same span is 5. Choose whichever matches your document.
Why does adding one month to 31 January give 28 February?
Because there's no 31 February. When the day doesn't exist in the target month, the result moves back to the last day of that month. In a leap year that's 29 February.
Can I count business days with my own holidays?
Yes. On the Working Days tab, choose your weekend, then paste your holidays one per line as 2026-12-25. Holidays that fall on a weekend are ignored so they aren't deducted twice.
Which weekend patterns are supported?
Saturday and Sunday, Friday and Saturday, and Sunday only. If your workplace uses a different pattern, you can add the extra days off to the holiday list.
Is my date of birth stored or sent anywhere?
No. Everything is calculated in your browser. The page doesn't save the dates you type, and it doesn't send them to a server.
Can I rely on this for legal or official purposes?
Use it as a quick, accurate check, then confirm with the official source. Rules about age and deadlines vary by place and by document, and a calculator can't know which one applies to you.
Disclaimer
This page is for general information. Results follow the Gregorian calendar and the conventions described below. They aren't legal, medical or financial advice. For visas, contracts, school entry or any deadline with real consequences, check the date against the official rule that applies to you.
Method and sources
All maths uses whole calendar dates, with no clock times, so time zones and daylight saving changes can't shift an answer. Each date is converted to a day number (days since 1 January 1970) with an integer-only algorithm, which is why every day count is exact. Years, months and days are found by adding whole months to the start date, moving back to the last day of the month when the day doesn't exist, and counting what's left in days. The weekday is the day number modulo 7. The only use of your device clock is to find today's date and to run the live countdown.
- International Organization for Standardization. ISO 8601-1:2019, Date and time: Representations for information interchange.
- Hinnant H. chrono-Compatible Low-Level Date Algorithms (days from civil date, civil date from days).
- Dershowitz N, Reingold EM. Calendrical Calculations. 4th ed. Cambridge University Press; 2018.
- Pope Gregory XIII. Papal bull Inter gravissimas, 1582, introducing the Gregorian calendar and its leap-year rule.